DIY WoodWorking – Woods and Stains

Knowing which stains to pick to the woods you happen to be using on your special projects definitely makes the difference in it’s finish and appeal. For DIY Woodworking – woods and stains, consideration in different finish needs to be given to the sort of wood you might be using. Don’t expect fir to look like limed oak or walnut.

Check out these quick thumbnails on woods and stains:


Ash takes all stains well, nonetheless it needs a heavy filler for all those level finishes. All finishes are generally dull-rubbed or waxed.


Has small pores and may be finished with or without filler. Birch needs a good walnut, mahogany or cherry finish. Bleaches well.


Cedar can be a soft wood and needs a shellac sealer coat to seal the oil inside the wood. Use a Venetian red oil color reduced with naphtha (a paint solvent and additive) and put it on having a rag. For interior of hope chests and closets, no stain or finish ought to be applied


Cherry is quite attractive in light brown or red, however it doesn’t bleach. It has small pores, so that it doesn’t have to be filled, but a thin filler can be useful. Cherry is usually rubbed and polished except when antique finished.


True mahogany needs to be finished only as mahogany in a variety of shades of reds or browns. Avoid using dark stains on mahogany. Mahogany bleaches well. All mahoganies usually whisker under water stain and so are best finished non-grain raising stains.


Maple wood requires no filler. Selected white woods can be used for modern blond tones with or without staining. To get brown and red tones use a double-staining technique. Does not respond well to bleaching.


There are over 300 models of oak which can be generally classed as red or white. White oak could be the superior oak with open pores which demand a heavy filler base. There is no stain needed for natural, light or golden colors.


There’s white and yellow pine, because both versions are treated differently. Both woods are attractive in natural and stained finishes, but white pine is subject to some pitch bleeding and needs to be sealed having a first coat of the synthetic resin primer.


Walnut is excellent for those shades of stain of brown, although not red. The sap wood is creamy and requires a supplementary stain coat to fit. Use of hot linseed oil brings out excellent color.